To pair your sensor(s) and departure switch(es) to the gateway, please do the following:
3. Set the gateway in sensor/switch registration mode:
Make a long press (approx. 10 seconds) on the gateway central button marked with a “Settings” icon until the corresponding LED starts blink in blue.
Now return to the sensors and switches.
4. Insert the batteries in all sensors and switches at the same time. The LED on each product should blink green until the pairing has ended.
5. Wait until the LED on the back of the gateway stops to blink confirming that the registration of the products has completed. Automatically your products should appear in the Home app shortly after. In case not all sensors and departure switches appear in the Home app, then remove the batteries in the undetected products and perform step 3 to 5 once again.
6. Assemble all the sensors and switches by clicking the front and rear parts together.
Tip: If the products are to be fixed to the wall by screws, then fix the back part to the wall before assembling the product.
From here, you can customize the name of the VELUX products, the sensors and the gateway, as well as adding them to rooms, zones, scenes and automations.
You are now ready to control your VELUX product from the Apple Home app or by asking Siri.